Enclosure Heaters Custom Designed for All Conditions
Enclosure heaters are a necessity when protection from condensation and/or freezing is required. These heaters can be ordered with an adhesive backing, or they can be factory vulcanized to an aluminum plate. The plate will have a flange for easy bolt in assembly. If your application requires it, an air sensing thermostat can be installed in-line, bonded to the heater or mounted remotely. Click here to view our brochure
Factory Specifications:
- 120 volt
- Watt density of (5 W/in²)
Contact the factory for alternate voltages.
-
Fan Enclosure
-
-
Minimum Usage Requirements
The chart below is used to determine the total wattage requirements for both insulated and non-insulated enclosures assuming the enclosures are basically air tight. If the enclosure is located where windy conditions are add an additional 50% to the wattage requirement listed. Non bold is non-insulated; bold is for insulated enclosures.
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
